Get In Touch

Customized Solutions

Customized Solutions

We understand that not all your requirements can be addressed using standard products. We understand your concern for the environment too. Hence we put extra efforts to bring to you specific solutions for your specific needs!

Custom Sensor

A large European 3PL service provider deploys 1000’s of lights in their racking area which are ON 24x7. This means lacs of rupees, tons of CO2 and damage to the environment! The Customer tried standard off-the-shelf motion sensors which did not work as
(a) motion in adjoining aisles interfered
(b) motion at the ends interfered and
(c) trolley movement on the floor above interfered.

The Pyrios Solution:The client engaged Pyrios. We developed a directional sensor which switched on the lights only when someone entered for picking or stacking material, which is a 2 min activity usually happening around 10 times in one day. This means a saving of 90% of the electricity!

Custom mounting of lights

The same client faced the challenges of light breakage in the aisle. We found out that the breakages were due to non-standard mounting in a very harsh environment.

The Pyrios Solution: We designed custom lights meant specifically for the use-case:

(a) We used custom mounting of the internal driver to prevent driver failure

(b) We used stainless steel harnesses to secure the lights

(c) We used shock absorbing pads to minimize vibrations

Lights have been deployed for over 3 years and no breakages have been reported.

Custom mounting of lights

The same client faced the challenges of light breakage in the aisle. We found out that the breakages were due to non-standard mounting in a very harsh environment.

The Pyrios Solution: We designed custom lights meant specifically for the use-case:

(a) We used custom mounting of the internal driver to prevent driver failure

(b) We used stainless steel harnesses to secure the lights

(c) We used shock absorbing pads to minimize vibrations

Lights have been deployed for over 3 years and no breakages have been reported.

Custom Light

A German Auto MNC wanted to upgrade to LED lights in their plant. However scrapping the existing lights (54W X 4 Linear Lights in one fixture) was costly and environmentally irresponsible.

The Pyrios Solution:We made linear LED lights of 40W each designed to fit in existing fixtures of the client. These gave the same light output as the High Output lights the client was using in the plant. Another satisfied client!

Copyright © 2019 | ZUNO, PYRIOS, "Aapka Bachat Khata" are trademarks of Pyrios Convergence Private Limited , All rights reserved.
Made with LOVE in India by : DesignPitara
Privacy and Cookie Policy